home *** CD-ROM | disk | FTP | other *** search
/ Windows Expert / Windows Expert.iso / drivers / f1280501.zip / INSTALL.HLP < prev   
Text File  |  1993-06-15  |  81KB  |  2,200 lines

  1. HelpVOICE:
  2.  
  3. Orchid Fahrenheit VA and Fahrenheit VA/VLB Voice Notes installation
  4. Instructions:  
  5.  
  6.  Network Server Users:
  7.     
  8.     Select "Loaded, but NOT ACTIVATED" or "NOT LOADED".
  9.     
  10.     SERVER:
  11.  
  12.     1. If you set the "SETUP.INF" file to READ ONLY, you must flag 
  13.        it to normal, before you install.  Example for netware network
  14.        "Flag setup.inf n".
  15.  
  16.     2. Reset it to READ ONLY after the installation.
  17.  
  18.     NODES OR WORKSTATION INSTALLATION:
  19.  
  20.     1. Copy ORCHINST.DAT from your network shared directory to
  21.        your Windows working directory.  (i.e. where the WIN.COM
  22.        resides.)
  23.  
  24.     2. From the File Menu, select the RUN command and type,
  25.        ORCHINST.EXE from your Network Windows Directory.  To build 
  26.        the Group file and load the Application.
  27.  
  28.     3. Load the Fahrenheit Sound Driver, SEE "Load, but NOT ACTIVATED"
  29.        below.
  30.  
  31.  Loaded and INSTALLED in Windows:
  32.  
  33.     This will copy the Orchid Voice Note application and drivers into
  34.     an ORCHID subdirectory.  It will modify your SYSTEM.INI file
  35.     and REPLACE your "WAVE=" statement with an Orchid Driver.  The
  36.     installer will place the Orchid Voice Notes icon into your 
  37.     StartUp group.
  38.  
  39.  Loaded, but NOT ACTIVATED in Windows:
  40.  
  41.     This will copy the Orchid Voice Note application and drivers into
  42.     an ORCHID subdirectory.  The installer will place the Orchid Voice 
  43.     Notes icon into a Voice Note Group.  To activate, follow the 
  44.     directions listed below:
  45.  
  46.     1. Open your MAIN group and Double-Click on the Control Panel icon.
  47.  
  48.     2. Double-Click on the Driver icon and Click on the "ADD" button.
  49.  
  50.     3. Select the "Orchid Fahrenheit VA" option.
  51.   
  52.     4. Select "Current" drive already on system.
  53.     
  54.     5. The sound driver installation has now been completed.
  55.     
  56.     6. Place the ORCHID VOICE NOTE icon into your StartUp group and 
  57.        Re-Start Windows
  58.  
  59.  NOT LOADED AT ALL!:
  60.  
  61.     If you wish to save disk space or you do not have an Orchid 
  62.     Fahrenheit VA or an Orchid Fahrenheit VA/VLB, select this
  63.     option.
  64.  
  65. EndVOICE:
  66.  
  67. HelpOS2: 
  68.  
  69.     Orchid Fahrenheit drivers for IBM OS/2 version 2.x are
  70.     available on Orchid's BBS.  See the " Technical Support " 
  71.     section for information on accessing Orchid's BBS.
  72.  
  73. EndOS2:
  74.  
  75. HelpSCO:
  76.                                          
  77.     The Orchid Fahrenheit is currently supported on the SCO Unix
  78.     platform in the following resolutions:
  79.  
  80.      640 x 480  256 Colors             1024 x 768  256 Colors
  81.      640 x 480  32,768 Colors          1280 x 960   16 Colors
  82.      800 x 600  256 Colors             1280 x 1024  16 Colors
  83.  
  84.     The Fahrenheit is supported in the following SCO releases:
  85.  
  86.     Open Desktop 2.01
  87.     Xsight       4.1
  88.     Advanced Graphics Adapter EFS
  89.  
  90.     These drivers are available direct from SCO:
  91.  
  92.     SCO
  93.     400 Encinal St.
  94.     P.O Box 1900
  95.     Santa Cruz, Calif 95061
  96.     (408) 425-7222
  97. EndSCO:
  98.  
  99. HelpIntractv:
  100.  
  101.  
  102.  
  103.     The Orchid Fahrenheit is currently supported in the Interactive
  104.     Unix X-Windows Environment in standard VGA modes. Extended mode, PMI
  105.     drivers are currently under development and will soon be available
  106.     from Sunsoft for INTERACTIVE X11.
  107.  
  108. EndIntractv:
  109.  
  110. HelpTchsupt:
  111.  
  112.  
  113.    New Fahrenheit drivers and additional drivers not included with this
  114.    disk are available through the Orchid Technical Support Department or
  115.    may be downloaded from Orchid's BBS. You may also send your driver
  116.    questions and requests to the number listed below.
  117.  
  118.        Technical Support Department       (510) 683-0323
  119.        Technical Support Department Fax   (510) 683-0355
  120.        Orchid's BBS, 2400 baud, N, 8, 1   (510) 683-0327
  121.        Orchid's BBS, 9600 baud, N, 8, 1   (510) 683-0555
  122.  
  123.    Orchid currently provides a 16-line BBS system: 12-lines are dedicated
  124.    to 2400 baud units and 4-lines are dedicated to the 9600 baud units.  We
  125.    recommend that 1200 baud users call in on the 2400 baud lines.  Orchid's
  126.    modem settings are: Parity=NONE (N), Data Bits=8, and Stop Bits=1.
  127.  
  128. EndTchsupt:
  129.  
  130. HelpMore:
  131.  
  132.  
  133.  
  134.     More.... contains information on drivers that are not currently
  135.     included with the Fahrenheit, but may be available from the
  136.     Orchid BBS. Also included in this section are the phone numbers
  137.     for the Orchid Technical Support Department and the phone numbers
  138.     for the Orchid BBS.
  139.  
  140. EndMore:
  141.  
  142. HelpUtilMain:
  143.  
  144.   The Orchid Fahrenheit Video Adapter provides the following utilities:
  145.  
  146.   FSCAN.COM -- FSCAN.COM allows you to software select the vertical
  147.            refresh rates for your monitor, and center the screen
  148.            picture for all resolutions. This utility will
  149.            override the switch settings on your Fahrenheit 1280
  150.            card, and may be optionally included in your AUTOEXEC.BAT
  151.            file to automatically load the selected settings
  152.            whenever you boot up your system.
  153.          
  154.            To activate this application, type the following line
  155.            at your DOS prompt:
  156.  
  157.         FSCAN -i <drive>
  158.  
  159.         Note: Replace the <drive> statement with the letter
  160.         of your hard drive (i.e. FSCAN -i c: )
  161.  
  162.         Required parameters:
  163.  
  164.         -i (drive) : Install FSCAN on specified booting drive
  165.         -u (drive) : Uninstall FSCAN on specified booting drive
  166.         -ON        : Activate FSCAN
  167.         -OFF       : Deactivate FSCAN
  168.         -s         : Status of FSCAN
  169.  
  170.   FMODE.EXE -- Is a program designed to help you select the Fahrenheit
  171.            video modes which are available for your configuration.
  172.            With FMODE, you can switch your Fahrenheit into one of the 
  173.            many extended high resolution graphics and text modes. In 
  174.            addition, your Fahrenheit supports the hardware emulation 
  175.            of the video standards: MDA, HGC and CGA.
  176.  
  177.   FDEMO.EXE -- FDEMO is a demo program that allows you to view the
  178.            enhanced VGA graphic modes of your Fahrenheit.
  179.  
  180.   Additional Notes:
  181.   -----------------
  182.   To activate any of these programs, it is necessary to run the
  183.   programs from the directory in which they were installed. If
  184.   you accepted the default directory, the following example will work:
  185.  
  186.         cd\fah_util             <Enter>
  187.  
  188.   Run the desired utility.  
  189.   
  190.   To avoid the need for a directory change, you may wish to add this 
  191.   directory to your PATH statement located in your AUTOEXEC.BAT file.
  192.  
  193. EndUtilMain:
  194.  
  195. HelpUtilFin:
  196.  
  197.   Utility installation is complete. 
  198.  
  199. EndUtilFin:
  200.  
  201. HelpWin:
  202.  
  203.   Orchid Windows 3.x HyperDriver for the Fahrenheit
  204.  
  205.   The Fahrenheit Installer offers standard and network server 
  206.   installation.  If you are using Novell or a compatible network and 
  207.   wish to load the Orchid drivers to the network server for nodes or 
  208.   work stations to use, select this option.  Once installed on the 
  209.   network server, the Orchid Icon will appear on the nodes or work 
  210.   stations under the Control Panel.
  211.   
  212.   Note: You will not need to install the drivers on the Nodes or Work
  213.     Stations, after it has been installed on the Server.
  214.  
  215.   The table below lists the resolutions and colors available for  
  216.   the Fahrenheit boards.
  217.  
  218.   Resolutions   Color           Memory     Refresh Rates
  219.   ---------------------------------------------------------------
  220.    640 x 480    16 colors       1MB        60Hz, 72Hz
  221.    640 x 480    256 colors      1MB        60Hz, 72Hz
  222.    640 x 480    32,768 colors   1MB        60Hz, 72Hz
  223.    640 x 480    65,536 colors   1MB        60Hz, 72Hz
  224.    640 x 480    16.7M colors    1MB        60Hz
  225.    800 x 600    16 colors       1MB        56Hz, 60Hz & 72Hz
  226.    800 x 600    256 colors      1MB        56Hz, 60Hz & 72Hz
  227.    800 x 600    32,768 colors   1MB        60Hz
  228.    800 x 600    65,536 colors   1MB        60Hz
  229.   1024 x 768    16 colors       1MB        43.5(i)Hz, 60Hz & 70Hz
  230.   1024 x 768    256 colors      1MB        43.5(i)Hz, 60Hz & 70Hz
  231.   1280 x 960    16 colors       1MB        45(i)Hz, 48(i)Hz
  232.   1280 x 1024   256 colors      2MB        45(i)Hz, 48(i)Hz
  233.  
  234.   Notes:
  235.   
  236.   2MB available only on the Fahrenheit 1280/VLB & VA/VLB. 
  237.   (i) interlaced mode.
  238.   
  239.   Installation:
  240.  
  241.   This program will automatically install the Orchid Windows HyperDriver and
  242.   the Orchid Windows utility "ORCHID SETUP".
  243.  
  244.   Using the Orchid Windows HyperDriver:
  245.   -------------------------------------
  246.  
  247.   To configure the HyperDriver to display in a different resolution,
  248.   number of colors or menu font size use "ORCHID SETUP".
  249.  
  250.   For Windows 3.1, "ORCHID SETUP" is located inside the Control Panel.
  251.            
  252.            Select the Orchid Icon within the Windows Control Panel
  253.            to open the Orchid Setup Utility.  
  254.  
  255.   For Windows 3.0, "ORCHID SETUP" Icon is located on the  Windows desktop.
  256.  
  257.   IMPORTANT!!!!!
  258.  
  259.   If you have already loaded a Driver other than Standard VGA under Windows:
  260.   You MUST run SETUP from your WINDOWS subdirectory and select Standard
  261.   VGA before running Windows.
  262.  
  263.   If you select either 1280 x 960 or 1024 x 768 resolution in configuring
  264.   the Orchid HyperDriver, please be sure your monitor can support these
  265.   extended modes.  If your monitor does not support the above resolutions,
  266.   you will receive a scrambled display. If this happens, delete the 
  267.   ORCHID.INI file from the Windows directory. Restart Windows and then 
  268.   rerun the Orchid Setup Utility to select a compatible resolution. If 
  269.   you are not sure if your monitor can run these resolutions, we recommend 
  270.   the following actions:
  271.  
  272.   1. Check the Fahrenheit switch settings.
  273.   2. Use FSCAN.COM (SEE UTILITIES).
  274.   3. Check your monitor manual.
  275.   4. Contact your Dealer.
  276.   
  277. EndWin:
  278.  
  279. HelpLotus:
  280.  
  281.   Lotus 1-2-3 v 2.0 - 2.3 Display Drivers
  282.    
  283.   The following drivers are included:
  284.  
  285.   123D600.DRV  = 800 x 600  Dual Monitor Support
  286.   123D768.DRV  = 1024 x 768 Dual Monitor Support
  287.   123S600.DRV  = 800 x 600  Single Monitor Support
  288.   123S768.DRV  = 1024 x 768 Single Monitor Support
  289.   123TEXT.DRV  = 80 x25*
  290.   123TXT25.DRV = 132 x 25*
  291.   123TXT43.DRV = 132 x 43*
  292.  
  293.   *Color Text mode drivers
  294.  
  295. HelpLotusInst:
  296.   Lotus 1-2-3 includes an installation utility which allows the user to
  297.   update the available drivers. The following installation instructions
  298.   are to be run from your Lotus 1-2-3 directory using the Lotus INSTALL.
  299.  
  300.             Installing Lotus 1-2-3 (v2.0)
  301.          -----------------------------------
  302.   1. From the \123 directory type INSTALL.
  303.  
  304.   2. Select "Advanced Options".
  305.  
  306.   3. Select "Add new drivers to Library"
  307.  
  308.   4. When prompted for the path name insert the Fahrenheit Driver disk
  309.      and input the the floppy drive location. ( A: or B: )
  310.  
  311.   5. Select "Modify Current Driver Set".
  312.  
  313.   6. Choose one or both of the "Text Display" and "Graphics Display"
  314.      options.  Once you have made your selections, press the <Esc> key
  315.      to return to the "Advanced Options" menu.
  316.   
  317.   7. Select "Save Changes" and press <Enter> twice.
  318.  
  319.   8. Select "Exit Install Program" and select "yes".
  320.   
  321.   Lotus 1-2-3  v2.01 installation is complete.
  322.  
  323.  
  324.  
  325.          Lotus 1-2-3 Install Program (v2.3):
  326.         -----------------------------------
  327.   1. From the \123 directory type INSTALL.
  328.  
  329.   2. Select "Change Selected Equipment" from the Main Menu.
  330.   
  331.   3. Select "Add New Drivers to the Library".  The Install program will
  332.      prompt for the location of the drivers. Insert the Fahrenheit
  333.      drivers diskette and enter the drive letter. ( A: or B: )
  334.     
  335.   4. Select "Modify the Current Driver Set".
  336.  
  337.   5. Choose one or both of the "Text Display" and "Graphics Display" options.
  338.      Once you have made your resolution selections, press the <Esc> key to
  339.      return to the "Change Selected Equipment" menu.
  340.  
  341.   6. Select "Save the Current Driver Set" and press <Enter> twice.
  342.  
  343.   7. Select "End Install" and select "yes".
  344.  
  345.   Lotus 1-2-3 v2.3 installation is complete.
  346.  
  347. EndLotus:
  348.  
  349. HelpCADMain:
  350.  
  351.   The Orchid Fahrenheit Video Adapter provides display drivers for
  352.   the following CAD applications:
  353.  
  354.     AutoCAD Release 10 & 11 (Real Mode "RADI4.1")
  355.     AutoCAD Release 11 (Protected Mode "PADI4.2")
  356.     AutoCAD Release 12 (Protected Mode "PADI 4.2")
  357.     3D Studio version 1.0 & 2.0
  358.     AutoShade version 1.5, 2.0 & 2.1
  359.     CADKey version 3.51 to 4.06
  360.     CADVance version 3.5+
  361.     VersaCAD Designer version 5.4, 6.0 & 7.0 
  362.     VersaCAD 386 version 6.0 & 7.0
  363.     Generic CADD version 3.0 to 6.0
  364.     MicroStation version 3.3 to 4.0 (Real Mode)
  365.     MicroStation version 4.0 (Protected Mode)
  366.  
  367. EndCADMain:
  368.  
  369. HelpACAD10r:
  370.  
  371.   Driver Installation for AutoCAD Release 10 & 11 (Real Mode ADI 4.1).
  372.  
  373.   1.  Before using AutoCAD, you must first execute the driver by typing
  374.       at the DOS Prompt:
  375.  
  376.         FADI -[Option[Parameters]]
  377.       
  378.       Where [Option[Parameters]] is one or a combination of the following:
  379.  
  380.     0x[i]     Installs driver at interrupt "i", (0x10 to 0xFF).
  381.           Note: Default interrupt vector is "0x7A".
  382.  
  383.     D[n]      Selects Display Mode.  Note: Default is mode "0"
  384.  
  385.     R[n]      Selects Render Mode.  Note: Default is mode "0"
  386.  
  387.  
  388.       Where [n] is one of the following:
  389.                                   Minimum
  390.     n       Resolution      Color      Display      Render    Memory
  391.       --------------------------------------------------------------------
  392.     0       640x480         256           Y            Y      512K
  393.     1       800x600         16            Y            N      512K
  394.     2       800x600         256           Y            Y      1024K
  395.     3       1024x768        16            Y            N      512K
  396.     4       1024x768        256           Y            Y      1024K
  397.     5       1280x960        16            Y            N      1024K
  398.     7       1080x1024       16            Y            N      1024K
  399.     9       640x480         32K/64K       N            Y      1024K
  400.  
  401.   2.  Run AutoCAD and set the display device to "ADI display v4.x"
  402.       in the AutoCAD display device configuration menu.
  403.  
  404.   3.  Exit and save the configuration information.
  405.  
  406.   This driver is a TSR (Terminate and Stay Resident) program that must be
  407.   invoked BEFORE AutoCAD (or other AutoDesk products) will run.  The driver
  408.   will accept certain command line options that will change the behavior of
  409.   the driver.  These options will allow you to select the resolution for 
  410.   the display and rendering device, or to install the driver at a different
  411.   interrupt vector.
  412.  
  413. EndACAD10r:
  414.  
  415. HelpFeatures: 
  416.  
  417. AUTODESK ADI 4.2 Protected Mode Driver:
  418.  
  419. The Fahrenheit Series driver is a professional quality PADI (Protected 
  420. mode Autodesk Driver Interface) driver to be used with AutoCAD Release 
  421. 11/12, 3D Studio 1.0/2.0, and AutoShade 2.1.
  422.  
  423. Features
  424.  -     Protected mode operation, PADI 4.2 specification.
  425.  -     32 bit display list for "no regen" operation.
  426.  -     Display list operation with 36 active viewports, including 
  427.        pspace viewports
  428.  -     Birds-Eye and Edge-Pan features for convenient zooms and pans.
  429.  -     Partial redraws on overlapping vports.
  430.  -     Intelligent clean-up (Erase Buffer) to eliminate "flashing".
  431.  -     Display list memory meter.
  432.  -     AutoCAD memory usage statistics.
  433.  -     Paging Alarm - disables display list usage when paging becomes 
  434.        excessive.
  435.  -     Reliable dual screen operation.
  436.  -     Variable font support- allows fonts up to 16 by 30 in size.
  437.  -     International font support.
  438.  -     User configurable screen colors.
  439.  -     15 and 16 bit "Band-Free" rendering support.
  440.  -     24 bit Rendering support.
  441.  -     Text screen emulation window for Release 12.
  442.  
  443. The following resolutions are supported:
  444.     640x480         256 colors              0.5M/1M/2M
  445.     800x600         16 colors               0.5M/1M/2M
  446.     800x600         256 colors              1M/2M
  447.     1024x768        16 colors               0.5M/1M/2M
  448.     1024x768        256 colors              1M/2M
  449.     1280x1024       16 colors               1M/2M
  450.     1280x1024       256 colors              2M
  451.     640x480         32,768 colors           1M/2M   (Rendering Mode)
  452.     640x480         65,535 colors           1M/2M   (Rendering Mode)
  453.     640x480         16.7M colors            1M/2M   (Rendering Mode)
  454.     800X600         65,535 colors           1M/2M   (Rendering Mode)
  455.     1024x768        65,535 colors           2M      (Rendering Mode)
  456.  
  457.  
  458. Simplified Configuration
  459. HelpFONT:
  460.     Font Configuration:
  461.  
  462. 1.  The Driver will detect the Autodesk application that it is being 
  463.     configured for, and will provide correct defaults for all of the 
  464.     various applications.  By accepting all of the default parameters, 
  465.     your driver will be configured correctly. This works with AutoCAD, 
  466.     AutoShade, or 3D Studio.                     
  467.  
  468. 2.  This driver will use the 8 bit international font in the VGA BIOS 
  469.     (8x16), or an Aquila optional font file if present.  Font files may be 
  470.     in any size up to 16 x 30.
  471.  
  472. 3.  The driver searches for the file "AQUILA.FNT" in the current directory.  
  473.     If not found, it searches for the file specified in the variable 
  474.     "AQUILA_FONT" found in the DOS environment.  (Note: the installer will 
  475.     automatically configure this for you.)
  476.     
  477.     For example, "set aquila_font = c:\acad12\drv\9x15.fnt".  If the font 
  478.     file is readable, it will be used, otherwise the driver will borrow 
  479.     font data from the VGA BIOS. 
  480.  
  481.  Name            Width   Height  Int'l   Comments
  482.  =========================================================================
  483.  none            8       16      yes     VGA default
  484.  6x9.fnt         6       9       yes     extremely small
  485.  8x16.fnt        8       16      yes     more legible than VGA font
  486.  9x15.fnt        9       15      no      good for 800 modes
  487.  12x20.fnt       12      20      no      good for 1024 modes & small CRTs
  488.  12x24.fnt       12      24      no      good for 1024 or 1280 modes
  489.  15x25.fnt       15      25      no      best for 1280 modes & small CRTs
  490.  16x30.fnt       16      30      no      only useful for 1280 modes
  491.     
  492. NOTE:   The international font files are the only ones that will work 
  493.     satisfactorily with 3D Studio. All others may have strange 
  494.     characters instead of the arrows that you are used to seeing. This 
  495.     is perfectly OK, but often a little confusing. Most of the arrow 
  496.     heads needed to make the 12x20.fnt work with 3DS have been added, 
  497.     but it has NOT a full 8 bit international font.
  498.  
  499. EndFONT:
  500. EndFeatures:
  501.  
  502. HelpLayout:
  503.  
  504. Screen Layout:
  505. --------------
  506.  
  507. AutoCAD Screen layout - 
  508.  
  509. 1.  Current Color Display - The rectangle in the top left of the screen 
  510.     displays the current drawing color.
  511.  
  512. 2.  Logo - This is used to display the manufacturers logo.
  513.  
  514. 3.  Display Status Area - This area is present only when display list has 
  515.     been enabled.
  516.     
  517.     Memory Status - This provides a percentage of total system memory that 
  518.     is being used by AutoCAD.  AutoCAD may start to slow down when this 
  519.     display exceeds 100%.  After this figure exceeds 150%, "paging" will 
  520.     occur.
  521.     
  522.     Display/Screen Lists Memory Status - This shows the amount of memory 
  523.     being used by the display list and screen list.  When this line reads 
  524.     "Empty", this means that there is no drawing in memory (new drawing).
  525.     
  526.     Display List Status - 
  527.  
  528.     D       32 bit display list data is in use.
  529.     d       16 bit display list data has been selected.
  530.     Z       Zooming from the display list is allowed.  
  531.     z       Pspace and perspective zooms by AutoCAD.  Birds-eye will not 
  532.         work in viewport.
  533.     P       Page alarm enabled and paging occurred recently.
  534.     p       Page alarm enabled and no paging has occurred.
  535.     E       Edge-pan enabled.  Edge pan is impending.
  536.     e       Edge-pan enabled but none impending.
  537.  
  538. Graphics Flip Screen -
  539.  
  540. When enabled, the Graphics Flip Screen will emulate the VGA text window.  
  541. Use the F1 key to toggle between modes.  If you wish to execute any DOS 
  542. commands, the driver will switch the screen to a full screen text mode 
  543. which allows for a full DOS compatibility.  If you are using a plot 
  544. spooler or other TSR which requires a compatible "pop-up" window, this 
  545. option must be disabled.
  546.  
  547. EndLayout:
  548.  
  549. HelpBird:
  550.  
  551. Birds-Eye View -
  552.  
  553. MasterCAD provides you with an advanced Birds-Eye that is rich in 
  554. features.
  555.  
  556. Lockable Birds-Eye mode anchors the Birds-Eye to the screen for ready 
  557. access.
  558.  
  559. Powerful Dynamic PAN & ZOOM mode allows easy movement around the drawing.
  560.  
  561. A Motif-style interface makes moving and re-sizing the Bird's-Eye a breeze.
  562.  
  563. Quick Icons provide fast access to features.
  564.  
  565. Birds-Eye Shortcuts
  566.  
  567. Enable Birds-Eye
  568.  
  569. To display the birds-eye window, double click the right mouse button.
  570.  
  571. Disable Birds-Eye
  572.  
  573. To remove the birds-eye window, simply move your mouse until the cursor is 
  574. no longer inside the birds-eye. If this does not work, the birds-eye is in 
  575. static mode. To remove a static birds-eye, click on the window close 
  576. button in the top left corner of the birds-eye.
  577.  
  578. Pan / Zoom
  579.  
  580. To switch between pan and zoom, press the right mouse button.
  581.  
  582. Real time pan and zoom
  583.  
  584. Press the left mouse button  (pick button), while pressing either shift 
  585. key. The middle mouse button on a 3 button mouse also works.
  586.  
  587. Zoom vmax
  588.  
  589. Click on the zoom extents icon at the top of the birds-eye window.
  590.  
  591. Birds-Eye Usage -
  592.  
  593. This is one of the most simple and intuitive means of panning and zooming 
  594. within a drawing possible. A bird's eye window is analogous to the "You 
  595. are here" maps in shopping malls. It give you an overall view of the 
  596. drawing, showing you exactly where you are in that drawing. It also lets 
  597. you change the zoom factor and offset (panning) without entering any 
  598. AutoCAD commands, and your hand never has to leave the digitizer puck 
  599. or mouse.
  600.  
  601. Bird's eye also works in multiple viewport drawings, and will appear in 
  602. the aspect ratio of the currently active viewport.
  603.  
  604. When activated, either by entering the "AQBIRD" command, or by double-
  605. clicking the proper digitizer button, the bird's eye view will appear 
  606. under the current cursor location. In this window will appear a small 
  607. overall view of the amount of the drawing that AutoCAD has currently 
  608. placed in MasterCAD's display list. A highlighted rectangle will appear 
  609. within this window (filled white rectangle), indicating the currently 
  610. viewed area.
  611.  
  612. Also within this window is an outline rectangle that moves around with 
  613. the digitizer. This indicates the area that will be shown if a bird's eye 
  614. zoom is completed. If this rectangle contains an "X" in the middle, then 
  615. the bird's eye is in pan mode. If this rectangle contains an arrow, then 
  616. the bird's eye is in zoom mode. This is the same user interface presented 
  617. by AutoCAD in the "ZOOM DYNAMIC" command, and should be intuitive.
  618.  
  619. Pressing the pick button on your mouse or digitizer (left button with most 
  620. any mouse) allows you to toggle between zoom and pan modes in the bird's 
  621. eye window. You may move the pointing device around inside the new view. 
  622.  
  623. Pressing the selection button on your digitizer causes the selected view 
  624. to be used in the currently active viewport.
  625.  
  626. Pressing the pick button on your mouse or digitizer while simultaneously 
  627. pressing the "Shift" key on your keyboard toggles the birds-eye between 
  628. static and dynamic zoom modes. When in Dynamic zoom mode, MasterCAD 
  629. will instantly update the current viewport as you move the mouse.
  630.  
  631. Moving the cursor outside the bird's eye window cancels the function, and 
  632. does not affect the current view.
  633.  
  634. EndBird:
  635. HelpIcon:
  636.  
  637. Bird's Eye Icons -
  638.  
  639. Lock Icon 
  640.  
  641.   This Icon locks the Birds-Eye on to the screen. When selected, this Icon 
  642.   will be replaced by the UnLock Icon and the Birds-Eye will remain on the 
  643.   screen. When the Birds-Eye is locked you can freely move back and forth 
  644.   between AutoCAD and the Birds-Eye.
  645.  
  646. UnLock Icon
  647.  
  648.   Depressing this Icon unlocks the Birds-Eye on screen. When the Birds-Eye 
  649.   is unlocked, it is automatically removed from the screen when you execute 
  650.   a command or exit Bird's-Eye.
  651.  
  652. Dynamic Mode On Icon
  653.  
  654.   By depressing this Icon you enable Dynamic PAN & ZOOM. As you move the 
  655.   cursor around the Birds-Eye, the contents of the cursor are zoomed into 
  656.   your current viewport. Dynamic Mode can also be toggled on and off by 
  657.   pressing the pick button on the mouse while holding down either SHIFT 
  658.   key.
  659.  
  660. Dynamic Mode Off Icon
  661.  
  662.   Depressing this Icon will disable the Dynamic Pan & Zoom modes.
  663.  
  664. Zoom All Icon
  665.  
  666.   The Zoom All Icon is provided to allow you to zoom to the extents of the 
  667.   local display list.  Unlike AutoCAD's Zoom All or Zoom Extents commands,  
  668.   this command will not force a regen.  It is very useful when zooming back 
  669.   out to the extents of the drawing.
  670.  
  671. Sync Icon
  672.  
  673.   The Sync Icon allows for the synchronization of the Birds-Eye with the 
  674.   current viewport.  Occasionally it is useful to have the Birds-Eye match 
  675.   the current viewport.  Executing this Icon will force AutoCAD to perform 
  676.   a regen on the Viewport followed by the Bird's-Eye resetting itself to 
  677.   match the viewport.
  678.  
  679. Repaint Icon
  680.  
  681.   Depressing the Repaint Icon allows the Birds-Eye to be brought up to 
  682.   date.  The Birds-Eye will get out of sync with the viewport when blocks 
  683.   are moved or deleted.
  684.  
  685. EndIcon:
  686.  
  687. HelpPan:
  688.  
  689. Edge Pan -
  690.  
  691. Edge-pan is used to move around while zoomed into a drawing.  By leaving 
  692. the cursor near the border of the currently active viewport, this driver 
  693. will automatically begin to pan in that direction.  This only begins if the 
  694. cursor is left idle for a predetermined length of time.  There are a 
  695. number of configuration settings to use, and they can be changed within
  696. AutoCAD.  Experimentation will yield the best results for your needs.
  697.  
  698. Paging Alarm -
  699.  
  700. When AutoCAD's memory requirements exceed the amount of physical memory 
  701. available in your machine, it begins "paging", in order to gain extra 
  702. memory.  Paging means that certain memory areas are traded back and forth 
  703. with a "swap file" on the hard drive.  Due to the difference in access
  704. speed between main memory, and this "virtual" memory that is on the hard
  705. drive, AutoCAD begins to slow down, often to the point of being unusable.
  706. To combat this, memory is used very sparingly, and only when absolutely 
  707. necessary.  As a second line of defense against paging, when the amount 
  708. of memory paged out to disk exceeds several preset thresholds, the driver
  709. begins shutting down extra functions, and returns the memory to AutoCAD.
  710.  
  711.  
  712. When paging activity exceeds the first threshold, the screen-list feature 
  713. is disabled and all associated memory is returned to AutoCAD.  At this 
  714. point, the screen list status line will disappear from the status window.  
  715. Should paging activity continue, the driver will disable the display list 
  716. feature and return all of the memory to AutoCAD.  When this happens, the 
  717. second line of the status window will say "Disabled", to indicate that all 
  718. display list functionality has been terminated.
  719.  
  720. The driver will continue to function as normal, but redraws will be slower.  
  721. However, AutoCAD itself will now be much faster than it was when the paging 
  722. was occurring.  This allows you to complete your drawing session in much 
  723. less time.
  724.  
  725. EndPan:
  726. HelpCMD:
  727.  
  728. Custom Menu Design -
  729.  
  730. The following is an example of how to write a menu of useful functions 
  731. for MasterCAD that will work with Release 12. It should be added to your 
  732. standard "ACAD.MNU" file, and then recompiled.  Please see the "Custom 
  733. Menus" chapter of the "AutoCAD Customization Manual" for more information.
  734.  
  735. ***POP10
  736. [MasterCAD]
  737. [--]
  738. [Driver Status]AQDRQ
  739. [Dlist Status]'textscr;AQDLQ
  740. [--]
  741. [->Edge Pan]
  742.   [On/Off]AQEPAN
  743.   [Fast Pan]AQPANTM1=18;AQPANTM2=1
  744.   [Bump Pan]AQPANTM1=10;AQPANTM2=18
  745.   [--]
  746.   [->Border Size]
  747.     [Narrow]AQPANBRD=5
  748.     [Medium]AQPANBRD=20
  749.     [<-Wide]AQPANTM2=40
  750.   [->Delay]
  751.     [Fast  ]AQPANTM1=10
  752.     [Medium]AQPANTM1=27
  753.     [<-Slow]AQPANTM1=60
  754.   [->Repeat Rate]
  755.     [Fast  ]AQPANTM2=1
  756.     [Medium]AQPANTM2=3
  757.     [<-<-Slow]AQPANTM2=9
  758. [->Birds Eye]
  759.   [On]'aqbird
  760.   [Small]AQBESZ=15
  761.   [Medium]AQBESZ=30
  762.   [<-Large]AQBESZ=50
  763. [--]
  764. [->Zooms]
  765.   [In]AQZI
  766.   [Out]AQZO
  767.   [Way In]AQZWI
  768.   [Way Out]AQZWO
  769.   [<-Birds Eye]'_zoom _extents AQZWI
  770. [->Pans]
  771.   [Left]AQPL
  772.   [Right]AQPR
  773.   [Up]AQPU
  774.   [<-Down]AQPD
  775. EndCMD:
  776.  
  777. HelpBand:
  778.  
  779. Erase buffer -
  780.  
  781. When AutoCAD erases objects from the drawing database, it erases them from 
  782. the screen as well.  Sometimes this action causes other objects to appear 
  783. erased as well.  The "redraw" command has no effect, but a "regen" causes 
  784. the objects to appear correctly.
  785.  
  786. This problem can be solved by using the erase buffer to correct the display 
  787. corruption that occurs when objects are erased from the drawing.  Normally, 
  788. AutoCAD will request that the driver erase a line from the screen by drawing 
  789. it in black.  This causes the erased object to flash on and off the screen 
  790. during redraws.
  791.  
  792. Another side effect is that objects near the erased one may appear to be 
  793. incomplete.  To correct this in the fastest manner possible, the driver will 
  794. keep a list of erased vectors, and erase them only when the buffer fills.  
  795. This speeds up block erasures considerably.
  796.  
  797. There are certain after market software packages for AutoCAD, such as CAD 
  798. Overlay, which rely upon the ability to draw objects in black (background 
  799. color).  If you are using one of these packages and the screen images keep 
  800. coming up distorted, you may need to disable the erase buffer.
  801.  
  802. Band-Free Rendering -
  803.  
  804. When using the 15 or 16 bit rendering modes, often times the images appear 
  805. "banded".  This banding or staircasing occurs most often on objects with 
  806. large sloping or gently curving surfaces.  Band-Free rendering improves the 
  807. image quality in these modes.  
  808.  
  809. The "Band-Free" effect can be controlled as well.  It may be set to "Low", 
  810. "Medium", or "High", depending upon how much of the banding you want to 
  811. eliminate.  This feature will be of limited use to users of AutoShade,  
  812. but is beneficial to users of Autodesk RenderMan and 3D Studio.
  813.  
  814. EndBand:
  815.  
  816. HelpCommands:
  817.  
  818. Driver status (^L)
  819.  
  820. Typing a ^L at the AutoCAD command prompt will give the user a display of 
  821. the current display resolution, and memory allocation statistics. If 
  822. invoked from the text screen, the command used to provide help on the 
  823. driver local commands will also be displayed.
  824.  
  825. Help screen (AQHLP)
  826.  
  827. The help screen function displays a list and brief description of all the 
  828. driver local commands.  This command is best executed from the text screen 
  829. (flip screen), as the list will be much longer than the 3 lines allowed 
  830. inside the drawing editor.
  831.  
  832. AQDLQ
  833.  
  834. This command will give a printout of all the viewports currently in use, 
  835. along with some useful statistics about each one.  Perspective or 
  836. paperspace viewports will be listed as such, and the current viewport 
  837. will be indicated. Each viewport will list the amount of memory used by 
  838. it, as well as the number of erased vectors.
  839.  
  840. In multiple viewport drawings this will print out a large number of lines, 
  841. so it is better to perform this command from the text screen.
  842.  
  843. AQDRQ
  844.  
  845. This command will indicate the status of many features of the driver, and 
  846. will perform exactly the same as the driver status command.
  847.  
  848.  
  849. AQCLN
  850.  
  851. When editing drawings, sometimes you may notice a flashing of erased or 
  852. moved objects on the screen during redraws. This command will remove those 
  853. objects from the display list by initiating a "cleaning" cycle. This can 
  854. be executed at any time, even if the Erase Buffer has been disabled.
  855.  
  856. AQCOLOR=index,red,green,blue
  857.  
  858. This allows you to change the appearance of each color on the screen. It 
  859. may be useful when trying to match screen colors to plotter pens. The 
  860. valid range for all values is 0 - 255.
  861.  
  862. AQBIRD
  863.  
  864. This will cause the bird's eye window to appear underneath the current 
  865. cursor location. The window will display an overall view of the contents 
  866. of the currently active viewport. If the current viewport is a paperspace 
  867. or perspective viewport, the bird's eye will not appear.
  868.  
  869. AQEPAN
  870.  
  871. Entering this command will toggle on & off the edge pan feature.  It may 
  872. be disabled and re-enabled at any time during an AutoCAD session. The 
  873. bottom line in the status window will be updated to reflect the change.
  874.  
  875. AQPL
  876.  
  877. This will pan the current viewport to the left by 25 percent.  Regens 
  878. are never authorized by this command.
  879.  
  880. AQPR
  881.  
  882. This will pan the current viewport to the right by 25 percent.  Regens 
  883. are never authorized by this command.
  884.  
  885. AQPU
  886.  
  887. This will pan the current viewport up by 25 percent. Regens are never 
  888. authorized by this command. 
  889.  
  890. AQPD
  891.  
  892. This will pan the current viewport down by 25 percent. Regens are never 
  893. authorized by this command. 
  894.  
  895. AQZI
  896.  
  897. This will zoom in the current viewport by 50 percent. Regens are never 
  898. authorized by this command. 
  899.  
  900. AQZO
  901.  
  902. This will zoom out the current viewport by 50 percent. Regens are never 
  903. authorized by this command. 
  904.  
  905. AQZX
  906.  
  907. This will zoom the current viewport to the extents (extreme edges) of 
  908. the display list. Regens are never authorized by this command. 
  909.  
  910. AQZWI
  911.  
  912. Only available under Release 12, this special zoom command performs a 
  913. "ZOOM WAY IN", while keeping the same scale factor on the screen. This 
  914. will cause a regen to occur. Upon completion, you will be able to zoom 
  915. in futher before another regen will occur. Careful use of this command 
  916. upon loading a drawing can eliminate subsequent regens.
  917.  
  918. When finished, the viewport will look exactly as it did before. The 
  919. difference is that now you will be able to zoom in much farther before 
  920. a regen occurs. In the case of 32 bit display lists, subsequent regens 
  921. may never occur.
  922.  
  923. By performing a "ZOOM ALL", followed by an "AQZWI" command, you will be 
  924. able to zoom in and out of your drawing as much as possible without 
  925. causing further regens. This can also be used to eliminate the small 
  926. bird's eye image that is present when loading drawings in Release 12.
  927.  
  928. EndCommands:
  929.  
  930. HelpComtwo:
  931.  
  932. AQZWO
  933.  
  934. Only available under Release 12, this special zoom command performs a 
  935. "ZOOM WAY OUT", while keeping the same scale factor on the screen. This 
  936. is the conceptual opposite of the AQZWI command.
  937.  
  938. This will cause a regen to occur. Upon completion, you will be able to 
  939. zoom out as far as possible before another regen will occur. This can be 
  940. very useful when making large additions to your drawings, such as array 
  941. copying, or cross referencing other drawing files.
  942.  
  943. To get the most out of this command, zoom in as far as you will need into 
  944. your drawing. Then enter "AQZWO". When finished with the regen cycle, you 
  945. will be able to pan and zoom out as much as possible without incurring 
  946. further regens. This will allow you to add large blocks of data to your 
  947. drawing without limiting your ability to zoom around it.
  948.  
  949. AQPANSCR=xx
  950.  
  951. Changing the amount of the viewport scrolled by the edge pan feature is 
  952. accomplished here. The value must be between 10 and 80, and is a 
  953. percentage of the viewport size. Example- to set the scroll distance to 
  954. one quarter of the viewport size, "AQPANSCR=25" would be used.
  955.  
  956. AQPANBRD=xx
  957.  
  958. This will change the width of the edge pan border. The value must be 
  959. between 5 and 50, and is in number of pixels. Example- to set the edge 
  960. pan scroll zone to 16 pixels, "AQPANBRD=16" would be used.
  961.  
  962. AQPANTM1=xx
  963.  
  964. This command allows you to change the amount of initial delay used before 
  965. the edge pan begins to happen. This is given in number of "clicks", or 
  966. fractions of a second. There are 18 "clicks" to a second. Valid range 
  967. for this command is between 10 and 64. Example- to set the initial delay 
  968. to 1.5 seconds, "AQPANTM1=27" would be used.
  969.  
  970. AQPANTM2=xx
  971.  
  972. This command allows you to change the amount of repeating delay used 
  973. after the edge pan begins. This is given in number of "clicks", or 
  974. fractions of a second. There are 18 "clicks" to a second. Valid range 
  975. for this command is between 1 and 18. Example- to set the repeating rate 
  976. to twice a second, "AQPANTM2=9" would be used.
  977.  
  978. AQEBUF=xx
  979.  
  980. This command is used to change the size of the Erase Buffer. If zero is 
  981. used, the buffer is turned off. Example- to set the Erase Buffer to 25 
  982. objects, "AQEBUF=25" would be used. Valid range for this command is 0 
  983. (zero) to 32000.
  984.  
  985. EndCommands: 
  986.  
  987. HelpComquick:
  988.  
  989. Fahrenheit Driver Commands -
  990.  
  991. AQHLP   The help screen function displays a list of all the driver 
  992.     local commands, and gives a brief description of each.
  993. AQDLQ   Displays on a text or flipscreen all the viewports currently 
  994.     in use, along with some useful statistics about each one.
  995. AQDRQ   Displays current display resolution and memory allocation 
  996.     statistics (CTRL-L provides the same function).
  997. AQCLN   Removes objects from display list.
  998. AQBIRD  Displays Birds-eye window underneath current cursor location.
  999. AQEPAN  Toggles on and off the Edge-pan feature.
  1000. AQPL    Pan to the left by 25 percent.
  1001. AQPR    Pan to the right by 25 percent.
  1002. AQPU    Pan up by 25 percent.
  1003. AQPD    Pan down by 25 percent.
  1004. AQZI    Zoom in by 50 percent.
  1005. AQZO    Zoom out by 50 percent.
  1006. AQZWI   "Zoom way in" while using the same scale factor.  Only available 
  1007.     in AutoCAD 12.  Zooms in as much as possible before another 
  1008.     regen will occur.
  1009. AQZWO   "Zoom way out".  Only available in AutoCAD 12.
  1010.   
  1011. AQBESZ=xx       Resize the Birds-eye window.  Valid number is between 10 and 
  1012.         50, and it is a percentage of the graphics screen size.
  1013. AQCOLOR=x,x,x,x Index,RED,GREEN,BLUE ; The value range is 0-255 
  1014. AQPANSCR=xx     Amount of the viewport scrolled by the edge-pan feature.  
  1015.         Valid number must be between 10 and 80, and it is a 
  1016.         percentage of the viewport size.
  1017. AQPANBRD=xx     Width of the edge-pan border given in number of pixels.  
  1018.         Valid number must be between 5 and 50.
  1019. AQPANTM1=xx     Amount of initial delay given in number of "clicks" or 
  1020.         fractions of a second used before the edge-pan begins.  
  1021.         Valid range is 10 to 64.
  1022. AQPANTM2=xx     Amount of time before another edge-pan begins.  Valid number 
  1023.         is between 1 to 18.
  1024. AQEBUF=xx       Size of the erase buffer.  Using 0 turns off the buffer.
  1025.  
  1026. EndComquick:
  1027.  
  1028. HelpTuning:
  1029.  
  1030. AutoCAD Performance Tuning
  1031.  
  1032.  
  1033. Memory -
  1034.  
  1035. AutoCAD Releases 11 and 12 have a ravenous appetite for memory. In order 
  1036. for AutoCAD to run at its best, you should have a large amount of DRAM 
  1037. (Dynamic Random Access Memory) in your system. Both AutoCAD and MasterCAD 
  1038. are designed to work at their best when a large amount of memory is 
  1039. available. There is no fixed rule, but the following general formula is 
  1040. a good guideline:
  1041.  
  1042. Anything less than 4 megabytes is not recommended.  4 MB is barely usable. 
  1043.  
  1044. For the user who spends less than 2 hours a day using AutoCAD, 8MB is 
  1045. probably sufficient.
  1046.  
  1047. If you are impatient, have large drawings, use AME or 3rd party software, 
  1048. or spend most of your workday using AutoCAD, 12 to 16MB is reasonable 
  1049. and 32 megabytes is ideal. The increase in productivity will quickly 
  1050. offset the cost.
  1051.  
  1052. Disk optimization -
  1053.  
  1054. A disk drive will operate at its fastest when all files are located in 
  1055. physically contiguous areas on the drive. Over the course of time these 
  1056. files become "fragmented", which means that different parts of the file 
  1057. may be in physically different locations on the drive. The act of 
  1058. "seeking" to all these different locations increases the time it takes 
  1059. for the machine to load these files.
  1060.  
  1061. Files can become fragmented by being written to and saved again.  To 
  1062. correct this problem, there are a number of 3rd party hard drive utility 
  1063. packages that are capable of "de-fragging" your hard drive or drives. 
  1064. Used on a regular basis, they will keep your filesystem operating at 
  1065. peak efficiency.
  1066.  
  1067. The process of installing AutoCAD causes the entire "\ACAD" subdirectory 
  1068. structure to become very fragmented. The first thing that should be done 
  1069. after an AutoCAD installation or update is to de-frag the disk drive. 
  1070. Due to the large amount of data that will need to be moved, this may take 
  1071. some time.
  1072.  
  1073. Disk cache -
  1074.  
  1075. AutoCAD systems with more memory (10 MB and up) should reserve some of 
  1076. the memory for use by a disk caching utility, such as SMARTDRV. This will 
  1077. speed up drawing file access, as well as the amount of time it takes 
  1078. to load AutoCAD.
  1079.  
  1080. Finding the right amount of memory to set aside for disk cache will take 
  1081. some experimentation, but it should be at least 512Kb to be effective. 
  1082. If too much memory is taken away from AutoCAD by the caching software, 
  1083. AutoCAD will slow down considerably.
  1084.  
  1085. DOS extender
  1086.  
  1087. Release 11 uses Phar Laps' DOS extender version 2.2b as default, but can 
  1088. be upgraded to version 2.6 by using the NEWDX utility provided on the 
  1089. "Dxfix / Newdx / B1step" utility disk. Follow the directions, and install 
  1090. the updated DOS extender. This will allow AutoCAD to use more memory, and 
  1091. will make AutoCAD compatible with Microsoft Windows' HIMEM.SYS memory 
  1092. manager. This step is essential if you're are planning to use Windows on
  1093. the same machine as AutoCAD. Then use the "CFIGPHAR" program to set the 
  1094. "DEMANDLOAD" option to "ON".
  1095.  
  1096. Release 12 uses Phar Laps' latest (4.0) DOS extender, and is has the 
  1097. "demandload" option turned on as a default.
  1098.  
  1099. EndTuning:
  1100.  
  1101. HelpTrouble:
  1102.  
  1103. Troubleshooting -
  1104.  
  1105. Here are some of the most commonly asked technical support questions.
  1106.  
  1107. - AutoCAD has a white square in the top left corner of the screen.
  1108.  
  1109.     This indicates the current drawing color, and is not a bug. This 
  1110.     is not present on many VGA drivers (such as Autodesk's), but it 
  1111.     is OK for it to be there. It will change color to whatever the 
  1112.     current drawing color is.
  1113.  
  1114. - The display list is enabled in the configuration, but no status window 
  1115.   is present, and redraws are not as fast as they should be.
  1116.  
  1117.     MasterCAD has detected that the graphics card being used is not 
  1118.     fully compatible with this driver. This may also be confirmed by 
  1119.     the logo used in the menu zone- if this is an insect then MasterCAD 
  1120.     has detected an incompatible device. To solve this problem, please 
  1121.     buy a graphics device that includes MasterCAD. 
  1122.  
  1123. - The Paging Alarm may have been tripped. If the logo in the menu area is 
  1124.   normal, then this is the case. To reset the Paging Alarm and enable 
  1125.   display list capabilities again, you must exit and re-enter AutoCAD.
  1126.  
  1127. - Using a digitizer tablet causes my drawing to scroll off the screen.
  1128.  
  1129.     This is caused by the Edge-Pan feature. To keep this from 
  1130.     happening, you must re-configure the driver. As a default the 
  1131.     Edge-Pan is disabled, but you may have enabled this feature. To 
  1132.     disable it, use the command "AQEPAN".
  1133.  
  1134. - Release 12 does not have an option to use MasterCAD.
  1135.  
  1136.     Toggling to the flip screen always uses the text screen, instead 
  1137.     of the text window in the middle of the AutoCAD screen.
  1138.  
  1139. - 3D Studio ignores the font I have selected.
  1140.  
  1141.     Yes. This is because 3D Studio requires at least 80 columns and 
  1142.     30 lines to run. To accomplish this, the selected font may be 
  1143.     disabled and replaced with the standard VGA font.
  1144.  
  1145. - After rendering in AutoShade, the main graphics window is blank.
  1146.  
  1147.     AutoShade has been incorrectly configured. You must tell AutoShade 
  1148.     that a redraw is needed when returning from shading and RenderMan 
  1149.     screens.
  1150.  
  1151. - The Birds-Eye view refuses to appear, and it is enabled.
  1152.  
  1153.     The Birds-Eye will only appear in zoomable viewports, and is not 
  1154.     available in paperspace or perspective viewports.
  1155.  
  1156. EndTrouble:
  1157.  
  1158. HelpBug:
  1159.  
  1160. AutoCAD R12
  1161.     When rendering to a seperate screen, and dual-screen mode is
  1162.     selected, the graphics screen never comes back. This is a 
  1163.     deficiency of AutoCAD, which never tells the driver that it
  1164.     must return to its previous mode. The work-around is
  1165.     to re-initialize the graphics card by typing the following:
  1166.     "REINIT S <enter>". Please note that you must enter all the
  1167.     spaces as well, or this will not work.
  1168.  
  1169. AutoShade 2.0 & 2.1
  1170.     "Autoshade dispatcher, packet 165 not defined" message when
  1171.     configuring display driver- This is a known side-effect of
  1172.     using ADI 4.2 libraries. It is a benign message and may
  1173.     be ignored.
  1174.  
  1175.     When configured for a rendering screen with greater than 256
  1176.     colors, AutoShade may try to crash when doing a Save Image
  1177.     function (ALT F8). To compensate, this driver will limit the number
  1178.     of pixels that can be saved by the driver. The result is a narrow
  1179.     strip of pixels (752 of them to be exact) on the left side of
  1180.     your saved image file. It's not ideal, but its better than having
  1181.     AutoShade crash.
  1182.  
  1183. 3D Studio 1.0
  1184.     "3D Studio dispatcher, packet 165 not defined" message when
  1185.     configuring display driver or starting up 3DS- This is a known
  1186.     side-effect of using ADI 4.2 libraries. It is a benign
  1187.     message and may be ignored.
  1188.  
  1189. Aquila Plus -
  1190.  
  1191. Also available is Aquila Plus, a full featured AutoCAD device driver. 
  1192. In addition to the features and performance you have with MasterCAD, 
  1193. Aquila Plus has the following features:
  1194.  
  1195. - Icon based Menu System. This is the most complete icon based menu system 
  1196.   available. You can add new icons and reprogram them from within AutoCAD. 
  1197.   Menu icons may be drawn inside AutoCAD, or with any Windows paint 
  1198.   program. The menus can be stacked, with top level menus opening sub-menus 
  1199.   or whole new menu files. Commands can be AutoCAD native commands, 
  1200.   AutoLisp routines, or Aquila native commands.
  1201.  
  1202. - Spy Glass viewport. This allows a very quick means of roaming around the 
  1203.   drawing to view magnified details. It is ideal for reading title blocks, 
  1204.   dimensions, architects notes, etc.
  1205.  
  1206. - Multi Stage Birds Eye. This is the most powerful improvement to the birds 
  1207.   eye ever conceived. With the 32 bit display list power of Aquila and 
  1208.   Release 12, this multistage feature allows you to zoom the birds eye into 
  1209.   a small portion of the drawing for quick zoom and pans. As needed, the 
  1210.   birds eye may be zoomed out to full size again.
  1211.  
  1212. - Screen Saver. Why risk your expensive monitor?
  1213.  
  1214. For more information contact:
  1215.  
  1216.      Orchid Technical Support
  1217.      Phone: (510) 683-0323
  1218.      FAX:   (510) 683-0355
  1219.  
  1220.      OR
  1221.  
  1222.      In Europe, contact your local Orchid Affiliate
  1223.  
  1224. EndBug:
  1225.  
  1226. HelpADI42:
  1227.  
  1228. AUTODESK ADI 4.2 Protected Mode Driver:
  1229.  
  1230. The Fahrenheit Series driver is a professional quality PADI (Protected 
  1231. mode Autodesk Driver Interface) driver to be used with AutoCAD Release 
  1232. 11/12, 3D Studio 1.0/2.0, and AutoShade 2.1.
  1233.  
  1234. This Section covers Features, Fonts, and Commands that will be used
  1235. if you select our ADI 4.2 driver.  Please proceed, read and printout
  1236. sections that might be useful for you.
  1237.  
  1238. EndADI42:
  1239.  
  1240. HelpACAD11:
  1241.  
  1242. AutoCAD Release 11 configuration
  1243.  
  1244. 1.  Start AutoCAD by moving to the "\ACAD" directory and typing "ACAD".
  1245. 2.  Select option #5 "Configure AutoCAD".
  1246. 3.  Select option #3 "Configure video display".
  1247. 4.  Select option #1 "ADI P386 v4.0/4.1 display" will display the 
  1248.     "MasterCAD for Fahrenheit" configuration menu.
  1249. 5.  Choose the resolution mode to use.
  1250. 6.  If your system is capable of dual screen operation, you will be asked 
  1251.     if you wish to use this option.
  1252. 7.  Choose the menu colors to use for various parts of the screen.
  1253. 8.  Select the display list options desired.
  1254. 9.  Enable and select the Erase-buffer size if "flash-less" redrawing is 
  1255.     needed for editing.
  1256. 10. Choose the sensitivity setting for the Page-Alarm.
  1257. 11. Enable or disable Edge-pan option.
  1258. 12. Enable Birds-eye and select the size which is the percentage of the 
  1259.     total screen size.
  1260. 13. Configure the digitizer or mouse button to use for entering commands.  
  1261.     It is recommended that the transparent Birds-eye command "aqbird", as 
  1262.     this will allow you to change the location inside the drawing while in 
  1263.     the middle of an AutoCAD command.
  1264. 14. Exit Configuration menu.
  1265. 15. Configure pointer, printer and plotter.
  1266. 16. Return to the main AutoCAD menu, saving the configuration results.
  1267.  
  1268. Note: Please read the on-line help before calling Technical Support.
  1269.  
  1270. EndACAD11:
  1271.  
  1272. HelpACAD12:
  1273.  
  1274. AutoCAD Release 12 configuration:
  1275.  
  1276. AutoCAD Release 12 uses a much different method of locating device drivers 
  1277. than Release 11.  Release 12 will search directories for device files, and 
  1278. ignores the "DSPADI=" environment variable.  If you are installing or 
  1279. configuring Release 12 for the first time, please pay careful attention
  1280. to the following setup instructions.
  1281.  
  1282. 1.  The following environment variable will be added to your AUTOEXEC.BAT 
  1283.     file:  "Set ACADDRV=C:\ACAD12\DRV".
  1284. 2.  Set the font variable (See Font Section under ADI4.2 Features & 
  1285.     Commands).
  1286. 3.  Start AutoCAD by moving to the "\ACAD12" directory.  Enter "ACAD".
  1287. 4.  Selecting the video display driver "MasterCAD for Fahrenheit" will 
  1288.     display the Fahrenheit configuration menu.  Choose a resolution mode.
  1289. 5.  If your system is capable of dual screen operation, you will be asked 
  1290.     if you wish to use this option.
  1291. 6.  Choose the menu colors to use for various parts of the screen.
  1292. 7.  Select whether or not you wish to use the "Flip screen" feature.  If 
  1293.     enabled, this will allow the AutoCAD text screen to appear in the 
  1294.     center of the graphics screen, and will eliminate the mode switching 
  1295.     delay common to most multi frequency monitors.  If you are using an
  1296.     after market TSR product that pops up into the screen during AutoCAD
  1297.     sessions (calculator, plot spooler, etc.) then you should not use 
  1298.     this option.
  1299. 8.  Choose the Display list options desired.
  1300. 9.  Enable and select a size for the erase-buffer if you wish to have 
  1301.     "flash-less" redrawing when editing your drawings.
  1302. 10. Choose a sensitivity setting for the Page-Alarm.
  1303. 11. Enable or disable the Edge-Pan feature.  Later changes to the Edge-Pan 
  1304.     setting can be made within AutoCAD.
  1305. 12. Enable the Birds-Eye, and choose a size for it.  The size will be a 
  1306.     percentage of total screen size.
  1307. 13. Configure the digitizer or mouse button to use for entering a command 
  1308.     for you.  It is recommended that the transparent birds-eye command 
  1309.     "'aqbird" be used, as this will allow you to change the location inside 
  1310.     a drawing while in the middle of any AutoCAD command.
  1311. 14. Exit the Fahrenheit Configuration Menu.
  1312. 15. Configure pointer (mouse or tablet), printer and plotter as needed.
  1313. 16. Return to the main menu and save the configuration results.
  1314.  
  1315. Note: Please read the on-line help before calling Technical Support.
  1316.  
  1317. EndACAD12:
  1318.  
  1319. HelpDLC:
  1320.  
  1321. Display List Configuration:
  1322.  
  1323. This section covers the configuration of the display list features found 
  1324. in Fahrenheit Driver.  Please pay careful attention to the information 
  1325. presented here, since this will affect the performance of Fahrenheit 
  1326. driver under AutoCAD.
  1327.  
  1328. NOTE:  
  1329.     
  1330.     During configuration, you must choose a method of memory management 
  1331.     for the display list information.  Which method you use will depend 
  1332.     upon the type and number of drawing you work with during an AutoCAD 
  1333.     session. 
  1334.     
  1335.     Dynamic - Memory keeps on growing as it is needed.  This requires the 
  1336.     least amount of operator interaction, and is the most carefree.
  1337.     
  1338.     Static - Memory is a fixed amount that you will specify.  When the 
  1339.     display list grows bigger than memory limits, the display list will 
  1340.     be shut off.  The static option is a little bit faster, but requires 
  1341.     a knowledge of how much memory your drawings will consume.
  1342.     
  1343.     Some experimentation will be necessary in order to make the driver 
  1344.     work optimally for your particular environment and needs. 
  1345.  
  1346. 1.  The first option is "Enable Display List?".  Answering "No" will end 
  1347.     the display list configuration choices.
  1348.  
  1349. 2.  If you are configuring for Release 12, you will then be asked 
  1350.     "Enable 32 bit regens?".  Enabling this feature will greatly reduce 
  1351.     regens, providing faster operation.  The down side of this choice is 
  1352.     that the driver will use more memory for the display list.
  1353.  
  1354. 3.  Select a memory management scheme.  "Dynamic dlist (automatic)?" 
  1355.     Answering "Yes" will select the dynamic scheme.  You would then be 
  1356.     prompted to select a performance level, "Miserly (1), Normal (2) or 
  1357.     High Performance (3)".  If you have very little memory in your machine
  1358.     then select Miserly, if you have lots of memory, select High 
  1359.     Performance.  You will be asked to provide a memory size to use if  
  1360.     other options are selected.  If this is the first time being 
  1361.     configured, the driver will make a suggestion based upon the amount 
  1362.     of memory in your system.
  1363.  
  1364. 4.  Select erase buffer operation.  Answering Yes to "Enable erase buffer?" 
  1365.     brings up a second question "Erase buffer size?".  This will determine 
  1366.     the number of erased objects it takes before the driver will start an 
  1367.     automatic "cleaning" cycle to remove them from the display list.  
  1368.     Select a higher value if you plan on editing large drawings.
  1369.  
  1370. 5.  Configure the Page-Alarm option, "Enable Page-Alarm?".  Answering "Yes" 
  1371.     will bring up a second prompt about the sensitivity setting for the 
  1372.     Page-Alarm.
  1373.  
  1374. EndDLC:
  1375.  
  1376. HelpShade:
  1377.  
  1378. AutoShade Configuration:
  1379.  
  1380. 1.  Start up AutoShade, with the special configuration command "SHADE /R".
  1381. 2.  Select the correct pointing device.
  1382. 3.  Select option #2 "P386 Autodesk Device Interface display driver".
  1383. 4.  Choose a display resolution mode for the interactive screen.
  1384. 5.  Choose the colors to use in the various parts of the screen.  (Menus, 
  1385.     Pop-ups, Background, etc.)
  1386. 6.  Save and exit the colors menu when finished selecting colors.
  1387. 7.  Select option #2 "P386 Autodesk Device Interface rendering driver".
  1388. 8.  Choose a resolution mode for the rendering (shading and RenderMan) 
  1389.     screen.
  1390. 9.  If you select the 32768 or 65535 color modes, you will be asked if you 
  1391.     wish to enable "Band-Free" mode which allows the best color quality 
  1392.     possible in a 15 or 16 bit device. Select Low, Medium or High.
  1393. 10. Answer the next 3 questions with a "YES", since only one screen is 
  1394.     used, and must be redrawn upon switching.
  1395. 11. Select a hard copy device option.
  1396. 12. Configuration is complete and the interactive screen is displayed.
  1397.  
  1398.  
  1399. EndShade:
  1400.  
  1401. Help3DS:
  1402.  
  1403. 3D Studio 1.0 Configuration:
  1404.  
  1405. 1.  Go to the "\3DS" directory, and edit the file "3DS.SET" file.
  1406. 2.  Change the line that starts with "DEFAULT-DISPLAY = VGA320X200" to 
  1407.     read "DEFAULT-DISPLAY = RCPADI".
  1408. 3.  Change the line that begins with "MAIN-DISPLAY =" to read 
  1409.     "MAIN-DISPLAY = RCPADI".  Delete any leading semicolon (;) that may 
  1410.     be present.
  1411. 4.  Change the line that begins with "MATERIAL-DISPLAY = VGA320X200" to
  1412.     read "MATERIAL-DISPLAY = RCPADI".
  1413. 5.  Save the file and exit the editor.
  1414. 6.  Delete the file "3DADI.CFG", if present.
  1415. 7.  Start 3D Studio with the command "3DS".
  1416. 8.  Select a resolution mode for the Main display.  This is the mode that 
  1417.     will be used for the 2D Shaper, 3D Lofter, 3D Editor, and Keyframer.  
  1418.     There is no benefit to selecting a very high resolution mode, as these 
  1419.     screens will not use any more than 16 colors, but you may choose to
  1420.     experiment with this.
  1421. 9.  Select a resolution for the Materials Editor.  This will be a 256 
  1422.     color mode.  Use of a resolution greater than 640 x 480 will not 
  1423.     increase the usefulness of the Materials Editor at all.
  1424. 10. You should now find yourself inside the 3D Editor of 3D Studio. 
  1425. 11. The first time that you try to render a drawing or view an image, you 
  1426.     will be asked to select a resolution for the Rendering Device.  If you 
  1427.     select the 32768 or 65535 color modes, you will be asked if you wish 
  1428.     to enable "Band-Free" mode.  This allows the best color quality 
  1429.     possible in 15 or 16 bit device.  Select Low, Medium or High.
  1430.     Configuration is now complete.
  1431.  
  1432.  
  1433. 3D Studio 2.0 Configuration:
  1434.  
  1435. 1.  Go to the "\3DS" directory, and edit the file "3DS.SET" file.
  1436. 2.  Change the line that starts with "DEFAULT-DISPLAY = VGA320X200" to 
  1437.     read "DEFAULT-DISPLAY = RCPADI".
  1438. 3.  Change the line that begins with "MAIN-DISPLAY =" to read 
  1439.     "MAIN-DISPLAY = RCPADI".  Delete any leading semicolon (;) that may 
  1440.     be present.
  1441. 4.  Change the line that begins with "MATERIAL-DISPLAY = VGA320X200" to 
  1442.     read "MATERIAL-DISPLAY = RCPADI".
  1443. 5.  Save the file and exit the editor.
  1444. 6.  Delete the file "3DADI.CFG", if present.
  1445. 7.  Start 3D Studio with the command "3DS".  Answer the question about 
  1446.     having a VGA or SVGA.
  1447. 8.  Select a resolution mode for the "ADI main display".  This is the mode 
  1448.     that will be used for the 2D Shaper, 3D Lofter, 3D Editor, and 
  1449.     Keyframer.  There is no benefit to selecting a very high resolution 
  1450.     mode, as these screens will not use any more than 16 colors.
  1451. 9.  Select a resolution for the "ADI MEDIT".  This must be a 256 color 
  1452.     mode.  Use of a resolution greater than 640 x 480 will not increase 
  1453.     the usefulness of the Materials Editor at all.
  1454. 10. Answer the question about "Will RDPADI render to a separate screen?".  
  1455.     The answer is always "no".
  1456. 11. Select a resolution mode for the Rendering "RDPADI" Device.  If you 
  1457.     select the 32768 or 65535 color modes, you will be asked if you wish 
  1458.     to enable "Band-Free" mode.  This allows the best color quality 
  1459.     possible in a 15 or 16 bit device. Select Low, Medium or High.
  1460. 12. Answer the question about "Will RCPADI render to a separate screen?".  
  1461.     If using the driver for an 8514/A, the answer is "yes", for all others, 
  1462.     the answer is "no".
  1463. 13. Select a resolution mode for the Rendering "RCPADI" Device.  If you 
  1464.     select the 32768 or 65535 color modes, you will be asked if you wish 
  1465.     to enable "Band-Free" mode.  This allows the best color quality 
  1466.     possible in a 15 or 16 bit device. Select Low, Medium or High. 
  1467. 14. Configuration is now complete.
  1468.  
  1469. End3DS:
  1470.  
  1471. HelpCADKey:
  1472.  
  1473.   CADKey Display Driver
  1474.  
  1475.   The drivers for CADKey are:
  1476.  
  1477.        CK_911.EXE
  1478.       and  GRDEV.DAT
  1479.  
  1480.   Using the CADKey Driver:
  1481.      
  1482.   Note: If you are using CADKey 5.0 or Later, contact CADKey for the
  1483.     Latest drivers:
  1484.             Technical Support: (203) 298-8888
  1485.             BBS: (203) 298-6405
  1486.               
  1487.   1. Run the CADKey CONFIG program, and make the following selections:
  1488.   
  1489.   2. Select "Set Graphics Options".
  1490.   
  1491.   3. Select "Select Graphics Device" option.
  1492.   
  1493.   4. Select "Fahrenheit".
  1494.   
  1495.   5. Select the desired resolution (refer to the monitor specifications for
  1496.      supported resolutions ).
  1497.  
  1498.   6. Select the remaining graphics options.
  1499.   
  1500.   7. Exit.
  1501.    
  1502.   The driver is a TSR (Terminate and Stay Resident) that must be invoked 
  1503.   before CADKey is run. The driver will accept certain command line 
  1504.   options that will change the behavior of the driver. These options will 
  1505.   allow you to remove a previous copy of the driver from memory, or to 
  1506.   install the driver at a different interrupt.
  1507.      
  1508.   To remove a previous copy of the driver, use the '-r' option.
  1509.   EXAMPLE:
  1510.       'CK_911 -r   will remove the last installation of the driver
  1511.  
  1512.   This driver will install itself on interrupt 60h by default. To install
  1513.   it at another interrupt, use the '-fnn' option. Where 'nn' is
  1514.   replaced by a number between 60 and 67.
  1515.      
  1516.   EXAMPLES:
  1517.        'CK_911'      will install the driver at interrupt 60h
  1518.        'CK_911 -f62' will install the driver at interrupt 62h
  1519.  
  1520.  
  1521. EndCADKey:
  1522.  
  1523. HelpDataCAD:
  1524.  
  1525.   DataCAD Display Driver
  1526.  
  1527.   The drivers for DataCAD are:
  1528.  
  1529.          CK_911.EXE
  1530.          DL_911.EXE
  1531.          DRIVERS.GD2
  1532.     and  DRIVERS.GD4
  1533.  
  1534.   Using the DataCAD Driver:
  1535.  
  1536.   Run the DataCAD CONFIG program and follow the instructions to
  1537.   activate the Orchid Fahrenheit Driver.
  1538.  
  1539.   The driver is a TSR (Terminate and Stay Resident) that must be
  1540.   invoked before DataCAD is run. The driver will accept certain command 
  1541.   line options that will change the behavior of the driver. These options 
  1542.   will allow you to remove a previous copy of the driver from memory, or 
  1543.   to install the driver at a different interrupt.
  1544.    
  1545.   To remove a previous copy of the driver, use the '-r' option.
  1546.   EXAMPLE:
  1547.       'CK_911 -r     will remove the last installation of the driver
  1548.  
  1549.   This driver will install itself on interrupt 60h by default. To install
  1550.   it at another interrupt, use the '-fnn' option. Where 'nn' is
  1551.   replaced by a number between 60 and 67.
  1552.      
  1553.   EXAMPLES:
  1554.    'CK_911'              will install the driver at interrupt 60h
  1555.    'CK_911 -f62'         will install the driver at interrupt 62h
  1556.  
  1557. EndDataCAD:
  1558.  
  1559. HelpMicroCADr:
  1560.  
  1561.   MicroStation Real Mode Display Driver
  1562.    
  1563.   The drivers are:
  1564.    
  1565.          MGLS3.EXE
  1566.          MGLS3.MGL
  1567.          REMOVE.EXE
  1568.    
  1569.   Using the Display Driver:
  1570.      
  1571.   1. Run "USCONFIG", and select the "Fahrenheit Card" driver.   
  1572.   
  1573.   2. Exit and save.
  1574.  
  1575.   The driver is a TSR (Terminate and Stay Resident) that must
  1576.   be invoked before MicroStation PC will run. The driver will accept
  1577.   certain command line options that will change the behavior of the
  1578.   driver.
  1579.     
  1580.   If your Fahrenheit has 1 megabyte of VRAM, this driver will
  1581.   support either 2 pages ("swap screen" capability) or 256 colors. To 
  1582.   select the 256 color option, use the '/noswap' option when installing 
  1583.   the driver in memory. This may be done by modifying the 'USTATION.BAT'
  1584.   or 'MCE.BAT' files with a DOS Text editor.
  1585.  
  1586.   EXAMPLE:
  1587.  
  1588.   "MGLS3"          Will install the driver in 16 color mode. If enough
  1589.            VRAM is installed, swap screen will be enabled.
  1590.     
  1591.   "MGLS3 /noswap"  Will install the driver, telling it to display
  1592.            the maximum number of colors possible.
  1593.  
  1594.   
  1595.   To remove a previous copy of the driver, use the 'remove.exe'
  1596.   program.
  1597.  
  1598.   You may modify the resolution by editing your AUTOEXEC.BAT file and
  1599.   changing the following command.  Note: This SET command is 
  1600.   automatically added to your AUTOEXEC.BAT file. 
  1601.   
  1602.   "SET S31_911=<mode>"
  1603.    
  1604.    Where <mode> is:
  1605.         0    640 x 480, 256 colors
  1606.         1    800 x 600, 16 colors
  1607.         2    800 x 600, 256 colors
  1608.         3    1024 x 768, 16 colors
  1609.         4    1024 x 768, 256 colors
  1610.         5    1280 x 960, 16 colors
  1611.         6    --> reserved <--
  1612.         7    1280 x 1024, 16 colors
  1613.         8    --> reserved <--
  1614.      
  1615.   For example, to set the 800x600x256 mode type:
  1616.    
  1617.   SET S31_911=2
  1618.    
  1619.   MicroStation will now come up in 800x600x256 colors.
  1620.   
  1621.   To activate changes, please reboot your system.
  1622.  
  1623. EndMicroCADr:
  1624.  
  1625. HelpMicroCADp:
  1626.  
  1627.   MicroStation Protected Mode Display Driver 
  1628.   
  1629.   This driver will work with a Hercules-compatible MDA card as the
  1630.   second graphics device.  
  1631.   
  1632.   This can be configured as either the "Primary" (right screen) or
  1633.   "Secondary" (left side) graphics device.
  1634.    
  1635.   SWAP screen capabilities are supported if a 256 color mode is
  1636.   configured.
  1637.  
  1638.   The MicroStation (protected mode) drivers are
  1639.  
  1640.     "MGL911.EXP"
  1641.     "MGL911.MA"
  1642.     "MGL911.MGL"
  1643.  
  1644.   CONFIGURATION:
  1645.  
  1646.   The first time this driver is used, it will require the user to select 
  1647.   which video mode to use, and will present a menu of available resolution 
  1648.   modes from which to choose.  Once selected, a configuration file will be 
  1649.   created that the driver will access for subsequent MicroStation sessions.
  1650.  
  1651.   To permanently reconfigure the driver, DELETE the file
  1652.   "\USTATION\DRIVERS\MGL911.CFG" and run MicroStation again.
  1653.   
  1654.   To change the resolution mode used, you may set the
  1655.   environment variable "MGL911" to one of the following numbers:
  1656.          Resolution/Colors
  1657.      0        640 x 480 x 256
  1658.      1        800 x 600 x 16
  1659.      2        800 x 600 x 256
  1660.      3       1024 x 768 x 16
  1661.      4       1024 x 768 x 256
  1662.      5       1280 x 960 x 16
  1663.      6       Reserved
  1664.      7       1280 x 1024 x 16
  1665.      8       Reserved
  1666.  
  1667.   For example,to set 1024x768x256 type the follow statement at a DOS prompt:
  1668.  
  1669.        SET MGL911=4      <ENTER>
  1670.  
  1671.   MicroStation will now come up in 1024x768x256 colors.
  1672.  
  1673.   If the driver finds a legal value in the environment, it will use it
  1674.   to override any variable found in the configuration file.
  1675.  
  1676.   To activate the changes, please reboot the system.
  1677.  
  1678.     If the initialization code is unable to determine which mode to use, it
  1679.   will always default to the 640 x 480 x 256 color mode.
  1680.     
  1681.  
  1682. EndMicroCADp:
  1683.  
  1684. HelpVersaCAD:
  1685.  
  1686. VersaCAD Display Driver
  1687.     
  1688. There are two sets of VersaCAD drivers:
  1689.  
  1690.    Real mode (5.4, 6.0, 7.0)
  1691.        VC2_911.COM
  1692.        VCADREAL.CFG
  1693.  
  1694.    Protected Mode (6.0, 7.0) 
  1695.        VC3_911.COM
  1696.        VCAD386.CFG
  1697.        VCAD386.BAT
  1698.  
  1699.    and REMOVE.EXE for all versions.
  1700.  
  1701. LOADING THE DRIVER
  1702.     
  1703. Run the VersaCAD ENVIRO program, selecting the "Fahrenheit" screen driver.
  1704. You will be able to choose between "Single Screen" and "Dual Screen"
  1705. configuration,as well as various resolutions.
  1706.  
  1707. The VersaCAD driver file is a TSR (Terminate and Stay Resident) program that
  1708. must be invoked each time your machine is powered up. For this reason, it is
  1709. recommended that you include the VersaCAD.COM file name in your AUTOEXEC.BAT.
  1710.  
  1711. EMS MEMORY USAGE
  1712.    
  1713. As a default, this driver will reserve 512K of EMS memory when invoked. This
  1714. will be used to store the display lists needed for fast redraws. While this
  1715. should be enough memory to handle most drawings, additional EMS space may be
  1716. reserved once the driver has been loaded. This is done by setting the
  1717. environment variable 'VCAD_EMS=' to the number of EMS pages you wish to have
  1718. reserved. Each EMS page = 16K in size.
  1719.    
  1720.  EXAMPLE:
  1721.       'SET VCAD_EMS=64'     will cause the driver to reserve 1024K (64 pages
  1722.                 * 16K) of memory when the driver is loaded.
  1723.    
  1724.       'SET VCAD_EMS=0'      will tell the driver not to reserve any EMS. In
  1725.                 this case, display list processing will be disabled.
  1726.   
  1727. EndVersaCAD:
  1728.  
  1729. HelpGenCADD:
  1730.  
  1731.   Generic CADD Display Driver
  1732.   
  1733.   The driver for Generic CADD is:
  1734.  
  1735.       F1280L.VGD
  1736.  
  1737.   Using the Generic CADD Driver:
  1738.  
  1739.   Run the Generic CADD's CONFIG program to activate the driver.
  1740.  
  1741.   When using Generic CADD 3.0 to 5.0:
  1742.  
  1743.   1. Select "Other VGD Driver" and select the F1280L.VGD from the list.
  1744.  
  1745.   You may modify the resolution by editing your AUTOEXEC.BAT file and
  1746.   changing the following command. The SET command is automatically added
  1747.   to your AUTOEXEC.BAT file.
  1748.   
  1749.    "SET S31_911=<mode>"
  1750.    
  1751.    Where <mode> is:
  1752.         0    640 x 480, 256 colors
  1753.         1    800 x 600, 16 colors
  1754.         2    800 x 600, 256 colors
  1755.         3    1024 x 768, 16 colors
  1756.         4    1024 x 768, 256 colors
  1757.         5    1280 x 960, 16 colors
  1758.         6    --> reserved <--
  1759.         7    1280 x 1024, 16 colors
  1760.         8    --> reserved <--
  1761.    
  1762.   For example, to set 800x600x256 type:
  1763.    
  1764.   SET S31_911=2
  1765.    
  1766.   Generic CADD will now come up in 800x600x256 colors.
  1767.  
  1768.   To activate changes, please reboot your system.
  1769.  
  1770.  
  1771.   When using Generic CADD 6.0:
  1772.  
  1773.   1. Select "Orchid Fahrenheit VGA Accelerator" from the menu.
  1774.  
  1775.   2. The menu wil prompt you with a list of resolutions and will add a
  1776.      "SET=CADD_INIT=<Mode>" to your AUTOEXEC.BAT file.  This SET command 
  1777.      can be modified manually by editing you AUTOEXEC.BAT file or by 
  1778.      running the Generic CADD "CONFIG" file again.
  1779.  
  1780.   To activate changes, please reboot your system.
  1781.  
  1782. EndGenCADD:
  1783.  
  1784. /*- CADVance Driver Help -*/
  1785. HelpCADVance:
  1786.  
  1787.   CADVance Display Driver
  1788.   
  1789.   The driver for CADVance is:
  1790.  
  1791.      CDV911.DRV
  1792.  
  1793.   Using the CADVance Drivers:
  1794.      
  1795.   The driver is loaded into memory by CADVance, and therefore requires
  1796.   no intervention on the part of the user.
  1797.     
  1798.   This driver will work as a rendering device, if sufficient memory
  1799.   is available. The resolution will be the same as the resolution
  1800.   used in the 2D and 3D modes. Please note that rendering will only
  1801.   work if the driver is currently using a 256 color mode.
  1802.     
  1803.   You may modify the resolution by editing your AUTOEXEC.BAT file and
  1804.   changing the following command. The SET command is automatically added
  1805.   to your AUTOEXEC.BAT file.
  1806.    
  1807.     "SET S31_911=<mode>"
  1808.    
  1809.     Where <mode> is:
  1810.         0    640 x 480,  256 colors
  1811.         1    800 x 600,   16 colors
  1812.         2    800 x 600,  256 colors
  1813.         3    1024 x 768,  16 colors
  1814.         4    1024 x 768, 256 colors
  1815.         5    1280 x 960,  16 colors
  1816.         6    --> reserved <--
  1817.         7    1280 x 1024, 16 colors
  1818.         8    --> reserved <--
  1819.     
  1820.   For example, to set 800x600x256 type:
  1821.    
  1822.   SET S31_911=2
  1823.    
  1824.   CADVance will now come up in 800x600x256 colors.
  1825.   
  1826.   To activate changes, please reboot your system.
  1827.  
  1828. EndCADVance:
  1829.  
  1830. HelpDeskMain:
  1831.  
  1832.   The Orchid Fahrenheit Video Adapter provides display drivers for
  1833.   the following Desktop Publishers:
  1834.  
  1835.     Ventura Publisher version 3.0
  1836.  
  1837.     Resolution/Colors
  1838.      640 x 480 x 256
  1839.      800 x 600 x  16
  1840.     1024 x 768 x  16
  1841.     1024 x 768 x 256
  1842.  
  1843.     Gem Desktop version 3.0+
  1844.  
  1845.     Resolution/Color
  1846.      640 x 480 x 256
  1847.      800 x 600 x  16
  1848.     1024 x 768 x  16
  1849.     1024 x 768 x 256
  1850.  
  1851. EndDeskMain:
  1852.  
  1853. HelpVentura:
  1854.  
  1855.   Ventura Publisher Display Drivers for version 3.0.
  1856.  
  1857.   The drivers are:
  1858.    
  1859.         SDGEMVP.VGA
  1860.        and  SYSFONT.BG
  1861.  
  1862.   Using the Ventura Publisher Driver:
  1863.    
  1864.   To use the Ventura drivers, the startup batch file for
  1865.   Ventura, VP.BAT or VPPROF.BAT, must be modified.
  1866.   This batch file is usually located in the root directory.
  1867.   Modify the entry for the screen driver as follows:
  1868.    
  1869.   The line that reads
  1870.    
  1871.      DRVRMRGR %1 /S=SDFVGAH5.VGA/M=01
  1872.    
  1873.   must be modified to read
  1874.    
  1875.      DRVRMRGR filename %1 /S=SDGEMVP.VGA/M=01
  1876.    
  1877.   Note: replace 'filename' with 'VP' or 'VPPROF' depending on the
  1878.   name of your 'BATCH' file.  The "M=" is in reference to the 
  1879.   mouse in your system.   Do not change that option (M=1, M=2, 
  1880.   M=32, etc.).
  1881.     
  1882.   You may modify the resolution by editing your AUTOEXEC.BAT file and
  1883.   changing the following command.  Note: This SET command is 
  1884.   automatically added to your AUTOEXEC.BAT file. 
  1885.    
  1886.       "SET S31_911=<MODE>"
  1887.    
  1888.       Where <MODE> is:
  1889.    
  1890.           0   640x480,  256 colors  
  1891.           1   800x600,  16  colors  
  1892.           2   800x600,  256 colors  
  1893.           3  1024x768,  16  colors  
  1894.           4  1024x768,  256 colors  
  1895.    
  1896.   For example, to set 800x600x256 type:
  1897.    
  1898.   SET S31_911=2  
  1899.    
  1900.   Ventura will now come up in 800x600x256 colors.
  1901.    
  1902.   To activate the changes, please reboot the system.
  1903.  
  1904. EndVentura:
  1905.  
  1906. HelpGem:
  1907.  
  1908.   GEM Desktop Display Drivers for version 3.X.
  1909.  
  1910.   The drivers for GEM Desktop are:
  1911.    
  1912.           SDGEMVP.VGA
  1913.     and   SYSFONT.BG
  1914.    
  1915.   This program will rename all the files with the name
  1916.    
  1917.          SD*.VGA
  1918.     to   SD*.BAK
  1919.    
  1920.   where * is the DOS wild card character.
  1921.    
  1922.   Using the GEM Desktop Drivers:
  1923.    
  1924.   You may modify the resolution by editing your AUTOEXEC.BAT file and
  1925.   changing the following command.  The SET command is automatically added
  1926.   to your AUTOEXEC.BAT file.
  1927.  
  1928.       "SET S31_911=<MODE>"
  1929.    
  1930.       Where <MODE> is:
  1931.    
  1932.           0   640x480,  256 colors  
  1933.           1   800x600,  16  colors  
  1934.           2   800x600,  256 colors  
  1935.           3  1024x768,  16  colors  
  1936.           4  1024x768,  256 colors  
  1937.    
  1938.   For example, to set 800x600x256 type:
  1939.    
  1940.   SET S31_911=2 
  1941.    
  1942.   GEM will now come up in 800x600x256 colors.
  1943.   
  1944.   To ensure that the mouse device is configured correctly,
  1945.   run the GEM installation program to reset the mouse type.
  1946.  
  1947.   To activate the changes, please reboot the system.
  1948.  
  1949. EndGem:
  1950.  
  1951. HelpWordPMain:
  1952.  The Orchid Fahrenheit Video Adapter provides display drivers for the
  1953.  following word processors:
  1954.  
  1955.       WordPerfect version 5.1         
  1956.  
  1957.      Graphics Mode    Text Modes          
  1958.      -------------    -----------      
  1959.        1024x768         132x43        
  1960.        800x600          132x25            
  1961.        640x480                             
  1962.                         
  1963.  
  1964.  
  1965.      Microsoft Word version 5.0
  1966.  
  1967.       Graphics Modes          Text Modes
  1968.      -----------------        ----------
  1969.      37 Lines   48 Lines       132 x 25
  1970.      38 Lines   54 Lines       132 x 43
  1971.      42 Lines   75 Lines
  1972.           96 Lines
  1973.  
  1974. EndWordPMain:
  1975.  
  1976. HelpWP:
  1977.  
  1978.   WordPerfect Display Drivers
  1979.  
  1980.   The Fahrenheit drivers for WordPerfect 5.1 are
  1981.    
  1982.     WPGRAPH.VRS
  1983.     WPTEXT.VRS
  1984.    
  1985.   Driver Installation:   
  1986.   --------------------
  1987.  
  1988.   1. From the Document screen displayed after entering Word Perfect,
  1989.      Press the SHIFT-F1 key to get to the setup menu.
  1990.  
  1991.   2. Select the "Display" menu or option 2.
  1992.  
  1993.   3. You may select Graphic Mode or Text mode drivers, option 2 or 3
  1994.      respectively.
  1995.  
  1996.   4. From within the Graphic Screen Type, choose "Fahrenheit Graphics
  1997.      Drivers".  From within the Text Screen Type, choose "Fahrenheit 
  1998.      Text Drivers".  The following resolutions are available for the 
  1999.      graphics and text modes:
  2000.     
  2001.      Graphics Mode                      Text Modes
  2002.      -------------                      -----------
  2003.        1024x768                           132x43
  2004.        800x600                            132x25
  2005.        640x480
  2006.  
  2007.   5. Upon completing your driver selection you may exit from the menu
  2008.      screens and begin using Word Perfect.
  2009.  
  2010. EndWP:
  2011.  
  2012. HelpMSWord:
  2013.  
  2014.   Microsoft Word Display Drivers
  2015.  
  2016.   The Fahrenheit driver for Microsoft Word v5.0 is
  2017.    
  2018.     SCREEN.VID
  2019.    
  2020.   1. Run WORD.
  2021.  
  2022.   2. Several modes are available for use, and the user may select from a 
  2023.      list by pressing the <ESC> key, the "O" key, then moving to the 
  2024.      DISPLAY TYPE enter with the arrow keys.  Finally, the F1 key brings 
  2025.      up a list. The graphics modes are: 37, 38, 42, 48, 54, 75, and 96 
  2026.      lines.  The text modes are: 132x25 and 132x43.
  2027.  
  2028. EndMSWord:
  2029.  
  2030. HelpCopy:
  2031.  
  2032.    This option will create a diskette with a Playback only version of 
  2033.    VOICE NOTES, a Windows sound driver that doesn't require a sound card, 
  2034.    and an installer for both of these.  You may provide this diskette to 
  2035.    your friends and associates, so that they can play Voice Notes embeded 
  2036.    in documents you send them.  The sound driver will be installed only 
  2037.    if there is no hardware already installed that can play PCM format 
  2038.    sound.
  2039.  
  2040.    The diskette has an installer program called INSTALL.EXE.  Insert the 
  2041.    diskette in a floppy drive and type "INSTALL".  The program will copy 
  2042.    the drivers and applications into your Windows subdirectory.
  2043.  
  2044.    The Windows SYSTEM.INI file will be updated and the WAVE= statement 
  2045.    will be modified.  If the system already has a sound card installed, 
  2046.    answer YES when the question is asked.  Just enter Windows and use
  2047.    the "RUN" command under the FILE option to activate the application.
  2048.  
  2049.     1. Select "RUN"
  2050.     2. Type "\WINDOWS\SYSTEM\OVNPLAY.EXE" and hit the <ENTER> Key.
  2051.  
  2052.    If you have any questions, please contact our Technical Support at 
  2053.    (510) 683-0323.
  2054.  
  2055. EndCopy:
  2056.  
  2057. HelpOtherp:
  2058. Orchid Products
  2059.  
  2060. Orchid Technology is a leading manufacturer of hardware and peripherals 
  2061. for personal computers. Since its incorporation in 1982, Orchid has been at 
  2062. the forefront of the personal computer industry with the introduction of 
  2063. new and exciting products. The following is a list of the products we 
  2064. currently manufacture:
  2065.  
  2066.  
  2067. RamQuest 8/16
  2068.  
  2069. The RamQuest 8/16 is an ISA memory card that is expandable to 32MB.  The 
  2070. RamQuest 8/16 installs in less than 3 minutes on your IBM PC, XT, AT and 
  2071. compatibles.  Extended and expanded memory are supported for maximum 
  2072. compatibility.
  2073.  
  2074. RamQuest 16/32
  2075.  
  2076. The RamQuest 16/32 is a Micro Channel memory card that is expandable to 
  2077. 8MB.  The IBM PS/2 Model 50, 55sx, 60, 70, 80 and 100% compatibles are 
  2078. supported.  The RamQuest 16/32 installs in less than 10 minutes and 
  2079. provides up to a 50% increase in performance.  It delivers true 32-bit 
  2080. memory with correct memory configuration.
  2081.  
  2082. Superboard 486 VLB
  2083.  
  2084. The Superboard 486 VLB (VESA Local Bus) is an ISA motherboard equipped 
  2085. with two VLB slots for a high-performance video card and/or fast IDE 
  2086. controller.  The local bus design provides direct 32-bit data transfer 
  2087. between the video card/IDE controller and the CPU at CPU speeds.  Pair 
  2088. the Superboard 486 VLB with an Orchid Fahrenheit VA/VLB graphics card, 
  2089. and you will experience the fastest graphics and motherboard combination 
  2090. possible.
  2091.  
  2092. Super IDE/VLB Controller
  2093.  
  2094. Orchid's Super IDE/VLB Controller nearly doubles the speed of your system
  2095. when paired with a VESA-compliant motherboard.  This disk controller
  2096. delivers a maximum data transfer rate of 8MB per second (ANSII Standard)
  2097. in AT-complatible IDE hard drivers.  The Controller provides support for
  2098. up to two hard drives and two floppy drives.
  2099.  
  2100. Gulliver Notebook
  2101.  
  2102. Gulliver delivers power, style and fun into notebook computing.  The
  2103. distinctive styling of Gulliver is an ergonomic achievement.  Gulliver
  2104. houses a powerful 386 or 486 CPU and features the latest in chipset
  2105. technology while affording you a number of upgrade options.  And it
  2106. does so with style -- from the rounded contours to the built-in trackball
  2107. to its removable battery pack.  Orchid takes the dull out of notebook
  2108. computing.  Choose from three exciting colors: Hunter Green, Charcoal,
  2109. or Blackberry.
  2110.  
  2111. Sound Producer Pro
  2112.  
  2113. The Sound Producer Pro delivers an unparalleled features set while
  2114. maintaining 100% SoundBlaster Pro compatibility.  With 20-voice FM
  2115. synthesizer and digital sounds, it delivers support for 4 sound
  2116. standards, and the ability to add Voice Notes to any Windows document
  2117. that supports Object Linking & Embedding (OLE).  The Sound Producer Pro
  2118. delivers the highest quality sound to your favorite games or business
  2119. presentations, with sampling rates up to 44.1 KHz.  It comes complete with
  2120. joystick port, MIDI In/Out support, and stereo microphone input.
  2121.  
  2122. EndOtherp:
  2123.  
  2124. HelpFah:
  2125.  
  2126. Orchid Products
  2127.  
  2128. Orchid Technology is a leading manufacturer of hardware and peripherals 
  2129. for personal computers. Since its incorporation in 1982, Orchid has been at 
  2130. the forefront of the personal computer industry with the introduction of 
  2131. new and exciting products. The following is a list of the products we 
  2132. currently manufacture:
  2133.  
  2134. Fahrenheit 1280
  2135.  
  2136. The Fahrenheit 1280 is the next generation Super VGA graphics adapter. Its 
  2137. Graphics Accelerator technology provides for faster Windows and CAD video 
  2138. performance.  The Fahrenheit 1280 offers video resolutions to 1280 x 1024,
  2139. vertical refresh rate up to 72Hz, and up to 16.8 million colors at 640x480.
  2140.  
  2141. Fahrenheit 1280 Plus
  2142.  
  2143. The Fahrenheit 1280 Plus is the next generation Super VGA graphics adapter. 
  2144. Its Graphics Accelerator technology provides for faster Windows and CAD 
  2145. video performance.  The Fahrenheit 1280 offers video resolutions to 1280 
  2146. x 1024, vertical refresh rate up to 72Hz, up to 16.8 million colors at
  2147. 640x480 and 65,536 colors at 800x600.
  2148.  
  2149. Fahrenheit VA
  2150.  
  2151. The Fahrenheit VA is more than just a Windows Accelerator--it features the
  2152. fastest graphics possible, with a twist!  With Orchid's own Voice Notes
  2153. software, the Fahrenheit VA enables you to add custom voice annotation to
  2154. all Windows applications supporting Object Linking & Embedding (OLE).  A
  2155. single keystroke opens the Voice Notes window, allowing you to easily
  2156. record, play, pause, and automatically embed your recording within the 
  2157. document.  The Fahrenheit VA offers video resolutions to 1280 x 1024,
  2158. vertical refresh rate up to 72Hz, up to 16.8 million colors at 640x480 
  2159. and 65,536 colors at 800x600.
  2160.   
  2161. Fahrenheit VA/VLB
  2162.  
  2163. Fahrenheit VA/VLB is a Fahrenheit VA (see above), except that it is 
  2164. designed for the VESA local bus slot (see Superboard 486 VLB).
  2165.  
  2166. Orchid P9000 VLB
  2167.  
  2168. P9000 VLB is, without question, the fastest Windows accelerator available 
  2169. on the market today.  Whether you're running Windows or AutoCAD, you're 
  2170. guaranteed to actually FEEL the difference.  Designed for a VESA local 
  2171. bus slot, the P9000 VLB Graphics Hardware Accelerator speeds bit blitting, 
  2172. line drawing, pattern filling, polygon filling, clipping and color 
  2173. expansion.  The P9000 VLB provides a maximum resolution of 1600x1200 - 256 
  2174. colors with a 70Hz flicker-free refresh rate.  32-bit color support is 
  2175. provided to 800x600 at 72Hz refresh rates and 65,536 colors are supported 
  2176. at 1024x768 at 72Hz refresh rate.
  2177.  
  2178. ProDesigner IIs
  2179.  
  2180. The ProDesigner IIs, an industry standard, delivers outstanding cost vs. 
  2181. performance at resolutions to 1024 x 768 and colors to 32,768 with refresh 
  2182. rates at the ergonomically pleasing 72Hz. 
  2183.  
  2184. ProDesigner IIs/EISA
  2185.  
  2186. The ProDesigner IIs/EISA is a 1MB Super VGA graphics adapter for high 
  2187. performance EISA personal computers.  The ProDesigner IIs/EISA provides 
  2188. ease of installation and all the SVGA high resolutions and colors you've 
  2189. come to expect from Orchid. 
  2190.  
  2191. ProDesigner IIs/MC
  2192.  
  2193. The ProDesigner IIs/MC is a high performance SVGA adapter based upon the 
  2194. same proven design as the Pro IIs.  It offers owners of IBM PS/2 Micro 
  2195. Channel personal computers and 100% compatibles, the performance and 
  2196. high color support that owners of the Orchid ISA and EISA video adapters 
  2197. have come to appreciate. 
  2198.  
  2199. EndFah:
  2200.